Digital Monitoring Products 1912XR Instalační příručka stáhnout pdf (Strana 3)

1912XR Installation Guide

Digital Monitoring Products, Inc. 1912XR Installation Guide

Page 3

2.3 Partitions and areas

The 1912XR can be programmed into four separate partitions. Partition 1 can be expanded into eight

separate reporting areas. Partitions 2 to 4 can each be expanded into four separate reporting areas. The

1912XR panel supports up to a total of 20 areas for all partitions combined.

2.4 Central station communication

You can program the 1912XR panel for local annunciation only or for reporting to remote DMP SCS-1

Receivers using digital dialer, Contact ID, multiplex, or the combined dialer/multiplex (DDMX)

communication format. Using DDMX allows you to have digital dialer during disarmed periods and

automatic multiplex connection after the last area in the system is armed. The 1912XR connects at the

premises to a standard RJ31X or RJ38X telephone jack. Use the DMP 893 Dual Phone Line Module when

connecting the 1912XR panel to two separate phone lines in fire or burglary applications.

2.5 Before you begin

Before installing the 1912XR, we recommend you read through the entire contents of this guide. Familiarize

yourself with the features of the panel and the key points to remember during the installation. Be sure to

read and understand all of the caution statements printed in bold italics.

In addition to this installation guide, you should also read through and familiarize yourself with these other

product documents:

• 1912XR Programming Manual (LT-0171)

• Security Command User's Guide (LT-0172)

• 1912XR Program Information Sheets (LT-0176)

• 714 Loop Expander Installation Sheet (LT-0161)

• 715 Loop Expander Installation Sheet (LT-0162)

• 862N and 862P Installation Sheet (LT-0202)

• 872 HARD-WIRE-LESS Installation Sheet (LT-0203)

• 881 Expansion Interface Installation Sheet (LT-0180)

• 5845LX Glassbreak Sensor Installation Sheet (LT-0219)

• 6155LX PIR Installation Sheet (LT-0211)

AC BELL

34567 89

14 15

17 18 19

GND

RED YEL GRN BLKB + B - SMK L5+ L5- L1 L2 L3 L4GNDGND

1912XR Panel

881

Expansion

Module

RJ38X

TELCO Jack

SECURITY CONTROL

123

SCS-1

Security Control

Receiver

RJ11X

TELCO Jack

Figure 2: The 1912XR can use multiplex, digital dialer, CID, or DDMX communication

1 2 3 4 5 6 7 8 ... 35 36

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products 1912XR Instalační příručka Strana 3

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products 1912XR