Digital Monitoring Products XR20 Instalační příručka stáhnout pdf (Strana 34)

Digital Monitoring Products XRSuper6/XR20/XR40 Programming Guide

zone informaTion

FI PN EM SV

A1 A2 FV AR

-- NT DY EX

Blank, Night, Day, or Exit. Press COMMAND to display additional zone types.

Fire, Panic, Emergency, or Supervisory. Press COMMAND to display additional zone types.

Auxiliary 1, Auxiliary 2, Fire Verify, or Arming. Press the Back Arrow key to display

the previous zone types.

If you select Blank, Night, Day, Exit, Auxiliary 1, or Auxiliary 2 as the Zone Type,

the zone must be assigned to an area. If you select Fire, Panic, Emergency, or

Supervisory as the Zone Type, these are 24-hour zones that are always armed and no

area assignment is needed. Press COMMAND to continue.

CAUTION: When a sensor reset is performed at the keypad, power will drop to devices

connected to zone 10 (zone 6 on the XRSuper6) causing the panel to sense an open

condition on all zone types other than Fire (FI), Fire Verify (FV), and Supervisory

(SV). Whenever non-Fire and non-Supervisory zone types are used on zone 10, make

the appropriate adjustments to the zone Armed Action to prevent false alarms from

occurring.

Refer to the Appendix for zone type specications and descriptions.

Note: For UL listed installations using wireless zones, do not use the FV zone

type.

11.6

AREA NO: -

Area Assignment

For XR20 or XR40 Area systems, enter the area number from 1 to 4 where this zone

is being assigned.

On XRSuper6, XR20, or XR40 panels

AREA: PERIMETER

For All/Perimeter systems, choose INTERIOR or PERIMETER.

INT BEDRM PERIM

For Home/Away systems, choose INTERIOR, PERIMETER, or BEDROOMS.

• INT (Interior) - Assigns the zone to area 2, Interior.

• BDRM (Bedroom)- Assigns the zone to area 3, Bedrooms. This option is only

displayed in Home/Away systems.

• PERIM (Perimeter) - Assigns the zone to area 1, Perimeter.

11.7

AREA:

Arming Zone Assignment

For XR20 or XR40 Area systems, this option species the areas to be armed by the

Arming Type zone. Press the appropriate number keys on the keypad to assign areas

1 to 4. When disarmed, all programmed areas are disarmed.

On XRSuper6, XR20, or XR40 panels

ARM AREA: PERIM

For All/Perimeter systems, choose PERIM or ALL. For Home/Away systems, choose

HOME, SLEEP, or AWAY.

PERIM ALL

Perimeter/All - Specify whether the arming zone arms just the Perimeter (PERIM) or

the Perimeter and Interior areas (ALL) for All/Perimeter systems. When disarming,

all areas are disarmed.

HOME SLEEP AWAY

HOME/SLEEP/AWAY - Specify whether the arming zone arms the Perimeter (HOME),

the Perimeter and Interior (SLEEP), or all three areas (AWAY). When disarming, all

areas are disarmed.

Arming zone operation

If a bad (faulted) Priority zone is in the area being armed by an Arming zone,

the arming is stopped. If there are no Priority zones, or they are all in a normal

condition, the following applies:

When a non-Priority zone is bad when an area is armed with a keyswitch on an

Arming zone, the arming is delayed for ve seconds. If, during the ve-second

delay, the keyswitch is turned to disarm, the arming stops. If the keyswitch is held

in the arming position for the full ve seconds, the bad zone is force armed and the

area is armed.

The ability to stop the arming does not apply if a wireless arming device is being

used. Refer to the Appendix.

Note: Arming from a zone, voice module, touch tone telephone, or Remote Link is

not affected by this operation.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 51 52

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products XR20 Instalační příručka Strana 34

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products XR20