Digital Monitoring Products Canadain XR500 Manuál s instrukcemi stáhnout pdf (Strana 16)

Digital Monitoring Products XR500 Series Programming Guide

InItIalIzatIon

Initialization

NOTE: WHEN ANY PANEL PROGRAMMING IS CHANGED, THE STOP ROUTINE MUST BE RUN AND ‘SAVING

PROGRAM’ MUST DISPLAY ON THE KEYPAD IN ORDER TO SAVE THE PROGRAMMING CHANGES. SEE SECTION 17.1.

2.1

INITIALIZATION

Initialization

This function allows you to clear selected parts of the panel program back to the factory

defaults in preparation for system programming. Run the initialization function on all

new installations.

CODES?

NO YES

SCHEDS?

NO YES

r each section of the panel program you

can initialize, a NO or YES option is provided.

Selecting YES advances you to

a confirmation prompt.

If you select YES, the panel initializes that section of

the program and advances you to the next prompt.

If you select NO, the panel advances you to the next

section prompt but does not initialize that section of

the program.

SURE?

YESNO

Selecting NO adv

ances

you to the next prompt.

2.2

INIT ALL? NO YES

SURE? YES NO

Clear All Memory

NO - Leaves existing programming intact then displays Clear All Codes.

YES - Clears all memory then displays Reset Panel. Reset the panel by shorting J16 and

re-enter programming mode to continue.

2.3

CODES? NO YES

SURE? YES NO

Clear All Codes

NO - Leaves existing codes intact.

YES - Clears the user code and user prole memory and assigns user code number 99 to

the highest user position.

Note: The user name for the default user code is created using the current programmed

primary user language.

2.4

SCHEDS? NO YES

SURE? YES NO

Clear All Schedules

NO - Leaves existing schedules intact.

YES - Clears all shift, and output schedules.

2.5

EVENTS? NO YES

SURE? YES NO

Clear Display Events Memory

NO - Leaves existing event memory intact.

YES - Clears the events memory.

2.6

ZONES? NO YES

SURE? YES NO

Clear Zone Information

NO - Leaves existing zone information intact.

YES - Clears the zone information for all zones. All zones are marked * UNUSED * and

must be renamed before being able to display on any system keypad.

2.7

AREAS? NO YES

SURE? YES NO

Clear Area Information

NO - Leaves existing area information intact.

YES - Clears the area information for all areas. All areas are marked * UNUSED * and must

be renamed before being able to display on any system keypad.

2.8

OUTPUTS? NO YES

SURE? YES NO

Clear Output Information

NO - Leaves existing output information intact.

YES - Clears all programmed Output names and any output cutoff assignment.

2.9

COM/RMT? NO YES

SURE? YES NO

Clear Communication and Remote Options

NO - Leaves existing communication and remote options intact.

YES - Clears communication and remote options programming to factory defaults.

2.10

DEFAULTS NO YES

SURE? YES NO

Set to Factory Defaults

NO - Leaves existing panel programming intact.

YES - Sets the remainder of the panel programming back to the factory defaults.

Note: Sets the Programming and User language to English.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 83 84

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products Canadain XR500 Manuál s instrukcemi Strana 16

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products Canadain XR500