Digital Monitoring Products Graphic Touchscreen Uživatelská příručka stáhnout pdf (Strana 26)

XR150/XR350/XR550 User’s Guide 19Arming and Disarming

All/Perimeter System Disarming

Disarming: While the system is armed, you can only enter the

premises through an entry/exit delay door without causing an

alarm. After opening the door, the keypad sounds a prewarn tone

to remind you to disarm the system. You must disarm the system

beforetheprewarntoneexpiresoranalarmonthedoorzonewill

occur.

Duringtheprewarntone,thekeypaddisplaysENTERCODE:.Enter

your user code to disarm the system.

Schedules: If you have programmed schedules for your system and

a user code is entered outside of a schedule, the keypad displays

INVALID TIME. This lets the user know that they are disarming

outsideoftheirauthorizedtime.

Alarm Display: After disarming, the keypad displays any zones

that tripped or any transmission problems that occurred dur ing the

armed period.All burglary zones are then disarmed and any by-

passedzonesareautomaticallyreset.

Disarmed Message:ThekeypaddisplaysALLSYSTEMOFFafterthe

system disarms.

Central Sta tion Report: A report of the system disarming can be

transmitted to the central sta tion. This is optional and can be

programmed for you at any time.

Disarming an All/Perimeter System

1. During the entry delay time, the keypad displays ENTER

CODE:.Enteryour4-digitusercode.

2. The keypad then displays any zones that went into alarm

or any communication problems that occurred during the

armed period.

3. The keypad next displaysALLSYSTEM  OFF to conrm the

system is disarmed.

Disarming During an Alarm

1. While the alarm bell or siren sounds, enter your user code

to silence the alarm. The keypad tone silences as soon as

therstkeyispressed.

For a burglary alarm, the keypad displays

IS THIS A FALSE ALARM? CANCEL VERIFY.

This allows you to investigate the alarm prior to disarming

the system. This display remains on the keypad until

a selection is made, the Back Arrow is pressed, or the

internal system bell cutoff timer expires.

2. If a valid alarm has not occurred, select YES or CANCEL to

disarm the system and cancel the alarm.

 ThekeypadnextdisplaysALLSYSTEMOFFtoconrmthe

system is disarmed.

 OR

If the alarm is valid, selectNOorVERIFY and send a verify

message to the Central Station.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 83 84

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products Graphic Touchscreen Uživatelská příručka Strana 26

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products Graphic Touchscreen