Digital Monitoring Products Graphic Touchscreen Uživatelská příručka stáhnout pdf (Strana 42)

XR150/XR350/XR550 User’s Guide 35User Menu

User Codes

This option allows you to add, delete, or change a user code. You

mayalsoassignspecicUserProlestoindividualusers.

1234 = UserNumber

34812 = UserCode

89456 = PIN

JohnSmith = UserName

7  = Prole

User Number - Every user is numbered 1 through 9999. This

numberidentiestheusertothesystemandistransmittedtothe

central station when the user arms or disarms areas.

User Code - Eachuseralsohasa3-to6-digitnumberto999999,to

enterintothekeypadwhenarmingordisarmingthesystem.Only

4-digit user codes can be assigned to All/Perimeter, Home/Sleep/

Away, or Home/Sleep/Away with Guest system users.

Note:AUserCodecannotbeginwithzeroand3-digitcodescannot

beginwith98.

PIN - In an XR550E Card Plus PIN system, each user is assigned a

uniquePIN(upto6digits)toenterintothekeypadafterpresenting

their card/proximity credential to the reader when accessing

system functions.

User Names - Each code may also be programmed with the user

name. You may enter up to 32 characters for the name. As needed,

refer to Appendix C for Entering User Names information.

User Prole - TheuserisalsoassignedaProle(1to99) bythe

personadministratingthesystem.Theprolenumberdetermines

the areas and functions the user can access.

Adding User Codes

1. Access the User Menu.

2. PressCOMMANDuntilUSERCODES?displays.

3. Press any Select key. The keypad displays

ADD DEL CHG BAT.

4.SelectADDorBAT(Batch)toaddanewusercode.

5. At the USER NUMBER: - option, enter a user number and

pressCOMMAND.ThedisplaychangestoUSERCODE:-.

Note:DoNOTprogramacodeforusernumber1unlessyou

intend to use the Ambush function. See Ambush.

6. Enterausercodeof3to6digitsandpressCOMMAND.The

user enters this number to arm, disarm, etc. If using access

cards, present the card instead of entering a code. After

enteringthecodethekeypaddisplaysUSERNUMBER###as

the user name.

7. A 32-character name may be entered to identify the user.

Press any top row key to clear the current name. You may

then enter the new name. After entering the name press

COMMAND.SeeEnteringNamesinAppendixD.

8. The display changes to PROFILE NO: -. Select the prole

numbertoassigna setofauthorizedfunctionsto theuser

codeasoutlinedintheProleTableonthepreviouspage.

Uptofourprolenumberscanbeassignedtoeachuser.

Note:On

All/Perimeter or Home/Sleep/Away systems use the

defaultproles1through10.ForHome/Sleep/AwaywithGuest

systemsusethedefaultproles2through9forthemainhouse

system, default proles 12-19 for the Guest 1 house system,

anddefaultproles22-29fortheGuest2housesystem.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 83 84

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products Graphic Touchscreen Uživatelská příručka Strana 42

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products Graphic Touchscreen