Digital Monitoring Products XR20 Instalační příručka stáhnout pdf (Strana 34)

XRSuper6/XR20/XR40 Programming Guide

Digital Monitoring Products www.dmpnet.com 2500 N. Partnership Boulevard Springfield, MO 65803

12.1 Appendix

This section of the XRSuper6/XR20/XR40 Programming Guide provides additional zone and system

information.

12.2 Status List

The Status List is the current status of the system or records of recent system events that are displayed

on the alphanumeric keypads. For example, in Home/Away systems, you might see the display SYSTEM

READY. This would be the current status of the system.

If an event were to occur on the system, such as an AC failure, the keypad would also display the AC

POWER -TRBL message. This is a system event that is placed into the Status List to alert the user to a

problem with the system.

Some Status List items remain in the display until manually cleared and some are cleared automatically

when the condition returns to normal. Below is a complete list of status and event displays the keypad

can show in the Status List:

Description Must be manually cleared?

Fire and Supervisory zone alarms Yes - by Sensor Reset

Fire and Supervisory zone troubles No - clears when zone restores

Burglary zone alarms No - clears after 8 minutes or at disarming.

All other zone alarms No - clears when zone restores

Zone monitor displays No - clears after 8 minutes

Day zone alerts No - clears after 8 minutes

System monitor troubles No - clears when condition restores

(AC and battery trouble)

Armed status display No

(System On)

Disarmed status displays No

(System Ready, System Not Ready)

Remote keypad messages No

(Sent to the keypad by your office or

central station)

Each item in the list is displayed for four seconds. When there are multiple items in the list, you can

use the COMMAND or ARROW keys to scroll forward or back through the items.

12.3 False Alarm Reduction Features

System Recently Armed report

The System Recently Armed report (S78) is sent when a burglary zone is placed into alarm within five

minutes of the system being armed.

12.4 4-2 reporting operation

When using the 4-2 reporting format, the panel follows this sequence to report to the receiver.

1. The panel dials the receiver phone number and waits for a response.

2. If the panel detects it is communicating with a 4-2 compatible receiver, all reports except those

that can only be sent in SDLC are sent to the receiver.

3. If the panel detects it is communicating with a DMP SCS-1 Receiver, all reports are then sent in

SDLC format.

4. If the panel last communicated to a 4-2 compatible receiver, a SDLC event cannot initiate a call

to the receiver.

5. If the panel last communicated to a DMP SCS-1 Receiver, any reporting event can initiate a call

to the receiver.

APPENDIX

1 2 ... 29 30 31 32 33 34 35 36 37 38

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products XR20 Instalační příručka Strana 34

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products XR20