Digital Monitoring Products XR550 Instalační příručka stáhnout pdf (Strana 21)

XR150/XR350/XR550 Series Installation Guide Digital Monitoring Products

InstallatIon

J1 Ethernet Connector (Panels with Network/Encryption only)

16.1 Description

The J1 Ethernet Connector is available on the XR150/XR350/XR550 with network or encryption to connect directly to

an Ethernet network using a standard patch cable. The Ethernet Connector supports 100MB/s full duplex operation

and the maximum impedance is 100 Ohms.

16.2 Ethernet LEDs

The two LEDs, located on the top edge of the J1 Ethernet Connector, indicate

network connection. The right, Link LED lights up green to indicate a valid

receive connection from the host network. The yellow LED lights when

connected to a 100Mb network and is off when connected to a 10Mb network.

16.3 Network Transient Suppression

The Model 270 Transient Suppression Module provides surge suppression from the Ethernet network for the

protection of DMP Panels. Refer to the Model 270 Installation Sheet (LT-1316) for complete information.

Figure 10: J1 Ethernet and LEDs

Activity LED

Link LED

ETHERNET

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Žádné komentáře

Digital Monitoring Products XR550 Instalační příručka Strana 21