Digital Monitoring Products Canadain XR500 Uživatelská příručka stáhnout pdf (Strana 45)

System Link User’s Guide 35

•

Pickup Only

: Select this option to program your System Link computer to answer

when the panel calls the receiver.

IP Address

: Enter the IP network address of the network device, such as an iCOM,

connected to the panel. This field appears when you select Network in the Type field.

Do not enter leading zeros when entering the IP address.

IP Port:

Enter the port through which you connect to the panel. 2001 is the default port.

If the panel is an ePAD or an iCOM

SL, the default is 9999. This field appears only when you

select Network in the Type field.

COM Port

: From the COM Port drop-down menu, select which COM port your computer

should use to communicate with your panel. This field appears when you select Direct in

the Type field.

Baud Rate

: Set the Baud Rate to 9600. The only time you may want to select a slower

baud rate is if you are using a direct cable connection and you are having communication

problems. If you change the baud rate setting, you must also change the setting on the

462N card connect to the panel. This appears when you select Direct in the Type field.

Location

In the Location section, enter the address where the panel is located. Also, enter a voice

phone number for the panel location and a night phone number where you may speak to

someone about the panel after business hours.

Extra Information

: You may record additional notes about the panel account. Click the

Extra Information button to open the Extended Panel Information window.

•

Response

: Information for the operator on what type of response to send in case

of an alarm on this panel.

•

Notes

: Any additional information, such as special details about the building and

premises, which may be useful for the operator or response team.

•

Emergency Call List

: Enter the name, address, and phone number for the

individuals to contact in case of an alarm on this panel account.

Note: If you have a module installed, there may be additional fields in this window. See

the module’s User’s Guide for information about those fields.

Finishing a New Account

Click on the OK button when you are finished entering all of the information to create a

new account.

System Info Button

For XR500 Series, XR2500F, and XR100 Series panels, select the account name in the Panel

Information window and press the System Info button to view the account name, model

number, panel software version, serial number, MAC address, and enabled features list.

For all other panels the System Info button displays only the account name, model number,

and firmware version number.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 103 104

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products Canadain XR500 Uživatelská příručka Strana 45

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products Canadain XR500