Digital Monitoring Products XR550 Manuál s instrukcemi stáhnout pdf (Strana 33)

XR150/XR350/XR550 Series Programming Guide Digital Monitoring Products

SYSTEM REPORTS

System Reports

8.1 System Reports

Select specic system reports the panel sends to the receiver.

8.2 Abort Report

YES allows the panel to send an alarm abort report to the receiver any time an area is

disarmed during Transmit Delay before an alarm report is sent and the Bell Cutoff Time has

not expired. After disarming an area, if any other area remains armed and has zone(s) in

alarm, the alarm abort report is not sent.

If the communication type is set to DD, a Warning: Alarm Bell Silenced report is also sent if

the alarm bell is silenced.

Note: Abort Reports are not sent for Fire, Fire Verify, or Supervisory type zones.

8.3 Restoral Reports

This option allows you to control when and if a zone restoral report is sent to the central

station receiver. Press any Select key to display the following options:

NO - Disables the zone restoral report option. Zones continue to operate normally but do

not send restoral reports to the receiver.

YES - Enables the zone restoral report option. Zone restorals are sent whenever a zone

restores from a trouble or alarm condition.

DISARM - Causes the panel to send restoral reports for a non-24-hour zone whenever a zone

that has restored from a trouble or alarm condition is disarmed. All 24-hour zones send

restoral reports as they restore.

8.4 Bypass Reports

YES allows the panel to send all zone bypasses, resets, and force arm reports to the

receiver. The bypass report includes the zone number, zone name, and the user name

and number of the individual operating the system. Reports are only sent if O/C User in

Communications is set YES for Receiver 1 or Receiver 2.

8.5 Schedule Change Reports

YES allows the panel to send all schedule changes to the receiver. The report includes the

day, opening time, closing time, extend schedule time, and the user name and number of

the individual making the change. Schedule changes made through Remote Link™ are not

sent to the printer or Display Events.

8.6 Code Change Reports

YES allows the panel to send all code additions, changes, and deletions to the receiver.

The code change report includes the user name and number added or deleted and the user

name and number of the individual making the change. Code changes made through Remote

Link™ are not sent to the printer or Display Events. Reports are only sent if O/C User in

Communications is set YES for Receiver 1 or Receiver 2. The default setting is YES.

8.7 Access Keypads

Select the keypad addresses (1 through 16) that send door access reports to the receiver.

Enter the keypad number using the digit keys. An asterisk next to the number indicates

that the keypad is selected. Press COMMAND to display the next set of keypads.

A report is sent with each door access made from the selected keypads. Keypads at

addresses not selected still operate the door relay but do not send access reports. The

report includes the user number, user name, keypad address, and device name.

8.8 Ambush

YES allows an ambush report to be sent anytime user code number 1 is entered at a

keypad. NO disables the ambush report and allows user number 1 to operate the same as

all other codes.

SYSTEM REPORTS

ABORT NO YES

RESTORAL: YES

NO YES DISARM

BYPASS NO YES

SCHD CHG NO YES

CODE CHG NO YES

ACCESS KEYPADS:

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

AMBUSH NO YES

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 77 78

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products XR550 Manuál s instrukcemi Strana 33

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products XR550