Digital Monitoring Products XR550 Uživatelská příručka stáhnout pdf (Strana 15)

XR150/XR350/XR550 User Guide 11Introduction

card reader location, they are not granted access on their next

attempt. A Failed to Exit message appears when a user assigned

the anti-passback option attempts to re-enter an area which

they did not exit properly. The user must exit the area through

the proper door. If not possible, your system administrator should

select the Forgive option in the User Codes menu option.

SYSTEM TROUBLE or SERVICE REQUIRED

There is a problem with one or more of the components in your

system. Contact our service department as soon as possible.

SYSTEM BUSY

The system is performing another task of a higher priority. This

usually only takes a few moments.

TEST IN PROGRESS

The system is currently being tested by an installation or service

technician.

Cell Phone Messages

Your system may be programmed at installation to send a variety

of messages to your personal cell phone.

The message option uses your security system’s reporting capability

to send reports using a cell phone number in much the same way

as someone sending an email would do. You can receive reports of

alarms, troubles, or system arming and disarming and know at a

glance your system status. See Appendix F for more information.

MyAccess™ Text Messaging Commands

Your system may be programmed to allow simple text messages to

be sent to the security system to perform basic user operations.

By texting a message from your cell phone or PDA, the following

actions can be performed: Arm/Disarm, check Armed Status,

CancelAlarm,andturnOutputsOn/Off.SeeAppendixFformore

information.

Understanding Security System Terms

Throughout this guide, and in some displays on your keypad, you

may see certain words or phrases that might be unfamiliar. Below

are some terms you may see here and on your keypad display:

Access (Door Access)

Entry/Exit doors that are used to restrict access to the building

or provide door access to authorized users. When a user code is

entered at the keypad by entering a code or presenting a card to

areader,thesystemveriesauthorityandunlocksthedoorfora

short period of time. See Easy Entry User’s Guide in Appendix E.

Areas

An area is made up of burglary zones that can be armed or

disarmedtogether.Oneareamightconsistoftheofcedoorsand

windows.Whenyouarmtheofce,thesezonesarmtogetherand

sound an alarm if opened.

Arming

Turns on the burglary protection in one or more areas of the

system. When armed, the system is able to sound alarm bells or

sirens and, if monitored, send alarm reports to a central station

whenaburglaryzoneistripped.

Fire, panic, and other 24-hour devices are always turned on and do

not need to be armed.

Central Station Monitoring

Your system can also be programmed to automatically send

alarm, trouble, and arming and disarming reports to a central

station.Operatorsatthecentralstationdispatchtheappropriate

authoritiesorcontactyouwiththespeciceventinformation.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 87 88

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products XR550 Uživatelská příručka Strana 15

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products XR550