Digital Monitoring Products XR550 Uživatelská příručka stáhnout pdf (Strana 20)

16 XR150/XR350/XR550 User Guide Arming and Disarming

Key Fob Disarming

Press and hold the key fob button programmed for Disarming

or the Toggle arm/disarm button. The Green LED two-second

acknowledgementlightindicatesAllSystemOff.

Area System Arming Operation

Area Assignment: Your security system has been set up into

separate areas. The number of areas and their names are listed on

the table in System Setup.

Arming the Area System

1. Press the COMMANDkeyuntilARMDISARMisdisplayed.

2. Select ARM to arm the system.

3. Enter your user code if required. The keypad displays

ALL?NOYES.

4. Select NO toarm only selectedareas.Go tostep5. Select

YES to arm all areas authorized for your user code. Go to

step6.

5. IfyouselectedNOinstep4,thedisplaybeginstolisteach

areatowhichyouhaveaccessfollowedbyNOYES.

 Example:OFFICENOYES

5a. Select YES for each area you want to arm.

5b. Select NO for each area you do not want to arm.

6. The system displays anybypassed zonesor faulted 24-hour

orPriorityzones.AfaultedPriorityzonecannotbearmed.

7. Atthispointyoucanforcearmorbypassanyfaultedzones.

Azonethatisforcearmedisrestoredintothesystemifitlater

returns to normal.A zone that is bypassed remains bypassed

until the system is disarmed. See steps 7a through 7d.

7a. Ifaproblemexistsonazone,thezonenameandproblemis

shownfollowedby:OKAYBYPASSSTOP.

7b. Select OKAYtoforcearmthefaultedzone.

7c. Select BYPASStobypassallfaultedzonesbeingdisplayed.

Note:24-hourzonescannotbebypassed.

7d. Select STOP to stop the system from arming. Correct the

zoneproblem(s)andreturntostep1.

Your system may be programmed to require a user code that

hasauthorizationtoforcearmorbypassafaultedzone.To

forcearmorbypassafaultedzone,thesystemasksyouto

enter a user code.

8. The display reads SYSTEM  ON if at least one area in the

system is armed, and ALL SYSTEM ON if all areas in the

system are armed.

Note: Your system may be pre-programmed at installation

for the Instant Arming option.

9. The keypad next displays EXIT:  ## INSTANT and begins to

count down the number of seconds remaining for you to exit.

Whenthedelayexpires,theexitzonesarearmed.

10. YoucanselectINSTANTwhileEXIT:##INSTANTisdisplayed

to immediately arm all exit zones and make them instant.

The keypad displays INSTANT.

Quick Arming

To quickly arm a desired area, enter the area number followed by

the COMMANDkeywhentheALL? NO YES option displays.

Checking the Armed Areas

After you have armed the system, you may press any Select key to

checkthearmedareaswhenALLSYSTEMONorSYSTEMONdisplays.

ThekeypadthendisplaysCHKARMEDAREAS:NAMENBRLIST.

Select NAME to list all of the armed areas by name. Select NBR to

enter the area number you would like to check. Select LIST to list

all of the armed areas by number.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 87 88

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products XR550 Uživatelská příručka Strana 20

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products XR550