Digital Monitoring Products XR550 Uživatelská příručka stáhnout pdf (Strana 41)

XR150/XR350/XR550 User Guide 37User Menu

Note:YoursystemmaybeprogrammedtolimitthePanicZoneTest

to only be performed during the Area 32 schedule.

User Proles

Add,delete,orchangeUserProles,thatdenetheauthorityof

each user code in the system. Several characteristics dene the

authorityofeachUserProlewithinthesystem.Alwaysmakesure

thatatleastoneadministratorinyoursystemhasaprolewithall

authorities and all areas.Uptofourprolesmaybeassignedper

user.

InAll/PerimeterorHome/Sleep/Awayoperation,UserProleswill

not display in the User Menu. When adding User Codes, use the

defaultproles1through10.RefertotheUserProlesChart.

InHome/Sleep/AwaywithGuestoperation,theUserProlesoption

does not display in the User Menu but when adding User Codes, enter

a prole number 1 through 9forthe main house system, proles

11-19 for the Guest 1 house system, and proles 21-29 for the

Guest2housesystem(XR550only).Proles2-9willdefaulttohave

Arming/Disarmingforalleightareas,whileproles12-19and22-29

only have Arm/Disarm assigned to Guest 1 and Guest 2 respectively.

Proles1,11,and21donothaveanyArming/Disarmingauthority

assigned.RefertotheUserProlesChart.

Prole Number-Eachprolemaybeassignedauniquenumber

from1to99.

Prole Name-Eachprolemaybeassigneda32-charactername.

TheProleNumberisthedefaultname.

Area Number - Each prole may be assigned specic areas of

the system for arming and disarming. When proles 1 to 98 are

created,NOareasareassignedbydefault.Thedefaultforprole

99isALLareasassigned.Prole99ispredenedinthesystemby

the factory. For the XR150 Series system you can assign areas 1 to

8.FortheXR350Seriespanelyoucanassignareas1to16andinan

XR550 Series system you can assign areas 1 to 32.

Access Area Number - Each prole may be assigned door access area

assignments.Defaultforprole1to98isNOareasassigned.Defaultfor

prole99isALLareasassigned.Prole99ispredenedatthefactory.

Output Group Assignment - Each prole may be assigned an

outputgroupnumberfrom1 to 10. Default for prole 1 to 98 is

NO output group assigned. Default for prole 99 is output group

10. Your system may by programmed to turn on an output group at

certain keypads when door access occurs.

User Menu Assignments-Each user prole may have anyofthe

menusassignedtoitasshownintheUserProleRecord.TheUser

Prole Record lists the user menu prole assignments and the

systemfunctionsusersareallowedtoaccessbasedontheprole

numbers assigned to their codes.

Adding User Profiles

1. Access the User Menu. Press COMMANDtoUSERPROFILES?.

2. Press any Select key. The keypad displays ADD DEL CHG.

SelectADDtoaddanewuserprole.

AtthePROFILENO:-option,enteranunusedprolenumber

and press COMMAND.ThedisplaychangestoPROFILENAME.

4. Press any Select key. Enter a prole name of up to 32

characters. Press COMMAND.SeeAppendixB.

5. At the ARM/DIS AREAS: option, select the area numbers for

arminganddisarmingassignedtothisprole.

6. The keypad displays ACCESS AREAS: . Select the area

numbers assignment to allow door access for this prole.

Press the COMMANDkey.

ThekeypaddisplaysOUTPUTGROUP:-.Enterthenumberforthe

OutputGroupassignedtothisprole.PresstheCOMMANDkey.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 87 88

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products XR550 Uživatelská příručka Strana 41

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products XR550