Digital Monitoring Products XR550 Uživatelská příručka stáhnout pdf (Strana 37)

XR150/XR350/XR550 User Guide 33User Menu

6. Initiate the transfer at the other manufacturer’s Z-Wave

portable controller. All Z-Wave devices are added to the

system with a default name (device type and number).A

16-characternamemaybeassignedtotheZ-Wavedevices

after the transfer is complete. When the transfer is

completethescreenwilldisplayZWAVESETUP?.

Note:If TRANSMISSION FAILED displays on the screen, your

system memory is cleared of all prior Z-Wave devices

programming and will need to add each Z-Wave device

individually.

Rediscover (REDISC)

This option allows your system to search for and re-establish

communication with Z-Wave devices that may have failed to

communicate.OnlyZ-Wavedevicesalreadyprogrammedintoyour

system are included in the rediscovery search. Any programmed

Z-Wavedevicethatisnotfoundduringrediscoverywillbedeleted

from your system.

1. Access the User Menu.

2. Press COMMANDuntilZWAVESETUP?displays.

3. PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.

4. Press COMMANDagaintodisplayFAVXFERREDISC.

5. SelectREDISC,thekeypaddisplaysREDISCOVERINGZWAVE

DEVICES while the system is searching for Z-Wavedevices.

6. When the rediscovery is complete, the keypad returns to

ZWAVESETUP?

Zone Status

Displaysalistofarmed,bypassed,oralarmedzones.Alsoallows

you to check the status of individual zones. Zone Status can be

usedtogiveyoualistofzonesbycategoryordisplaythecurrent

statusofanindividualzonenumber.Thefourcategoriesare:

• ArmedZones-zonesthatarecurrentlyarmed.

• BypassedZones-zonesthatarecurrentlybypassed.

• AlarmedZones-zonesthathavegoneintoalarmduringthe

current or previ ous armed period.

• Number-enterthenumberofanyzonetocheckitsstatus.

Using the Zone Status Function

1. Access the User Menu.

2. Press COMMANDuntilZONESTATUS?displays.

3. Press any Select key to display ARM BYPS ALR NBR.

4. SelectARMforalistofzonesthatarecurrentlyarmed.You

can scroll through the list by pressing the COMMANDkey.

5. SelectBYPSforalistofzonesthatarecurrentlybypassed.

6. Select ALR for a list of zones that have gone into alarm

during the current or previous armed period.

7. PressNBRandZONENO:-displays.

8. AttheZONENO:-option,enterthezonenumberyouwant

to check and press COMMAND.

 The zone number and name display followed by the zone

status. For example, a zone status for zone 1 might be

BACKDOOR-OKAY.

 Belowisalistofthezonestatusdisplays:

-OKAY = thezoneisinanormalcondition

-BYPAS = thezoneisbypassed

-BAD = thezoneisinabadorfaultedcondition

9. Afterdisplayingthezonestatus,ZONE:-returnsforyouto

enteranotherzonenumber.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 87 88

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products XR550 Uživatelská příručka Strana 37

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products XR550