30 XR150/XR350/XR550 User Guide User Menu
Favorites (FAV)
Z-WavedevicescanbegroupedtogethertocreateaFavorite.This
option allows you to program up to 20 Favorites in your system and
thenADD,EDITORREMOVEupto25Z-WavedevicesinaFavorite.
WhenactivatedfromtheFAVORITEusermenu,acommandissent
toitsZ-WaveDevices.AFavoritecanonlybeactivated,orturned
on. A separate Favorite must be created to change the conditions
set by the rst Favorite. For example, a Favorite called “Movie
Night”couldlocktheexteriordoors,closethegaragedoor,adjust
the temperature, and dim the lights in the family room to the
desired level.Another Favorite called “Wakeup” could then turn
on the lights, adjust the temperature, unlock the exterior doors,
and raise the garage doors.
Adding a FAVORITE
1. Access the User Menu.
2. Press COMMANDuntilZWAVESETUP?displays.
3. PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.
4. Press COMMANDagaintodisplayFAVXFERREDISC.Select
FAVandFAVORITENUMBER:-isdisplayed.
5. Enter a Favorite number between 1 and 20 and press
COMMAND. If the Favorite number entered is unassigned,
*UNUSED*displays.IftheFavoriteisalreadyassigned,you
may change the name or press the back arrow and enter a
new number.
6. PressanySelectkeyandacursordisplays.EnteraFavorite
name up to 16 characters. To remove a Favorite, press
Command without entering a name.
7. Press COMMANDtosavetheFavorite and the Favorite name
andADDEDITREMOVEdisplays.
ADD Devices to FAVORITES
1. Access the User Menu.
2. Press COMMANDuntilZWAVESETUP?displays.
3. PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.
4. Press COMMANDagaintodisplayFAVXFERREDISC.Select
FAVandFAVORITENUMBER:-isdisplayed.
5. Enter a Favorite number between 1 and 20 and press
COMMAND.
6. The Favorite number and name displays. Press COMMAND
and the FavoriteNameandADDEDITREMOVEdisplays.
7. Select ADD and the rst Z-Wave device stored in the
system that has not already been added to this Favorite is
displayed. Remaining devices can be viewed by pressing the
COMMANDkey.
8. Press any Select key to assign the displayed device to the
Favorite. The device name and the current device settings
display. When added to a Favorite,aZ-Wavedevicecanbe
programmedtorespondtovariousON/OFF/LOCK/UNLOCK/
HEAT/COOL commands basedon your desired settings.To
change a device setting, See Device Settings in Favorites.
Device Settings in FAVORITES
Lights
1. PressanySelectkeyatSETTING:andONOFFDIM
displays. Press the Select key under the desired
setting.
2. ForONorOFFsetting,whenselected,theFavorite
name and the next Z-Wavedevicestoredinthesystem
displays.
3. For DIM setting, DIM LEVEL: with the current setting
displays. To change the setting, press any Select key
andenterthenewlevel(1-10)andPressCOMMAND.
4. The Favorite name and the next Z-Wavedevicestored
in the system displays.
Komentáře k této Příručce