Digital Monitoring Products XTL Series Instalační příručka stáhnout pdf (Strana 27)

Digital Monitoring Products XTL/XTLC Programming Guide

OUTPUT OPTIONS

10.9 Disarmed Output

This output/Favorite turns on when all areas of the panel are disarmed. The output

turns off when an area is armed.

10.10 Burglary Output

This output/Favorite turns on any time a burglary zone goes into alarm. The output

turns off when the area in which the alarm occurred disarms and no other burglary zones

are in alarm. Enter 0 (zero) to disable this output.

10.11 Ready Output

This output/Favorite turns on whenever all disarmed zones are in a normal state. The

output turns off when any disarmed zone is in a bad state. Enter 0 (zero) to disable.

10.12 Arm-Alarm Output

Enter the output/Favorite to turn on steady when any area of the system is armed. If

an alarm occurs causing the keypads to turn Red, this output pulses and continues to

pulse for approximately three (3) minutes after the panel is disarmed. Enter 0 (zero) to

disable.

Wireless Outputs

• The Arm-Alarm Output is compatible with the Model 1117 Wireless LED

Annunciator and the Model 1116 Wireless Relay Output connected to a Model 572

Indicator LED.

• When the Model 1117 is battery operated, the LED is off when the system is

armed to conserve battery life. If an alarm occurs, the output ashes quickly.

• When using the Model 1116 connected to a Model 572, the LED is on when the

system is armed. If an alarm occurs, the output pulses.

• To operate the Arm-Alarm output within one second, program a fast response

number from 41 to 44. Fast response operation reduces overall wireless output

battery life.

• To operate the Arm-Alarm output within 15 seconds, program a slow response

number from 31 to 34. Slow response operation increases overall wireless output

battery life.

10.13 Heat Saver Temperature

Enter the desired temperature setting for all Z-Wave thermostats when the system

is armed ALL or AWAY. When the system is disarmed the thermostats return to their

previous settings. The range is 55-95 degrees. Enter 0 (zero) to disable.

10.14 Cool Saver Temperature

Enter the desired temperature setting for all Z-Wave thermostats when the system

is armed ALL or AWAY. When the system is disarmed the thermostats return to their

previous settings. The range is 55-95 degrees. Enter 0 (zero) to disable.

DISARMED OUT: 0

BURGLARY OUT: 0

READY OUT: 0

ARM-ALARM OUT: 0

HEAT SAVER

TEMPERATURE: 0

COOL SAVER

TEMPERATURE: 0

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 48 49

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products XTL Series Instalační příručka Strana 27

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products XTL Series