Digital Monitoring Products XT50 Instalační příručka stáhnout pdf (Strana 31)

Digital Monitoring Products XT Series Programming Guide

OUTPUT OPTIONS

11.9 Begin Exit Output

This output/Favorite turns on any time an exit delay time starts. The output turns off

when the system arms or when the arming has been stopped. Enter 0 (zero) to disable.

11.10 End Exit Output

This output/Favorite turns on any time an exit delay time ends. The output turns off

when the system disarms. Enter 0 (zero) to disable.

11.11 Ready Output

This output/Favorite turns on whenever all disarmed zones are in a normal state. The

output turns off when any disarmed zone is in a bad state. Enter 0 (zero) to disable.

11.12 Armed Output

This output/Favorite turns on any time an area of the system is armed. The output turns

off when the system completely disarms. Enter 0 (zero) to disable this output.

Favorites:

For a Home/Away system:

When the system is armed AWAY, the programmed Favorite activates.

When the system is armed SLEEP, the programmed Favorite plus 1 is activated.

For example, If the Armed Output is F05, F06 activates when Sleep is armed.

When the system is armed HOME, the programmed Favorite plus 2 is activated. For

example, If the Armed Output is F05, F07 activates when Home is armed.

For an All/Perimeter system:

When the system is armed ALL, the programmed Favorite activates.

When the system is armed PERIMETER, the programmed Favorite plus 1 is activated.

For example, If the Armed Output is F05, F06 activates when Perimeter is armed.

For an Area system:

When any area of the system is armed, the programmed Favorite activates.

11.13 Disarmed Output

This output/Favorite turns on when all areas of the panel are disarmed. The output

turns off when an area is armed.

11.14 Burglary Output

This output/Favorite turns on any time a burglary zone goes into alarm. The output

turns off when the area in which the alarm occurred disarms and no other burglary zones

are in alarm. Enter 0 (zero) to disable this output.

11.15 Late To Close Output

Enter the output/Favorite to turn on at the expiration of a closing schedule when all

areas are not armed. The output activates simultaneously with the CLOSING TIME!

keypad display. The output is turned off when all areas are armed, the closing is

extended, or the schedule is changed.

11.16 Arm-Alarm Output

Enter the output/Favorite to turn on steady when any area of the system is armed. If

an alarm occurs causing the keypads to turn Red, this output pulses and continues to

pulse for approximately three (3) minutes after the panel is disarmed. Enter 0 (zero) to

disable.

Wireless Outputs

• The Arm-Alarm Output is compatible with the Model 1117 Wireless LED

Annunciator and the Model 1116 Wireless Relay Output connected to a Model

572 Indicator LED.

• When the Model 1117 is battery operated, the LED is off when the system is

armed to conserve battery life. If an alarm occurs, the output ashes quickly.

• using the Model 1116 connected to a Model 572, the LED is on when the system

is armed. If an alarm occurs, the output pulses.

• To operate the Arm-Alarm output within one second, program a fast response

number from 41 to 44. Fast response operation reduces overall wireless output

battery life.

• To operate the Arm-Alarm output within 15 seconds, program a slow response

number from 31 to 34. Slow response operation increases overall wireless

output battery life.

BEGIN EXIT: 0

END EXIT: 0

READY OUT: 0

ARMED OUT: 0

DISARMED OUT: 0

BURGLARY OUT: 0

LATE CLS OUT: 0

ARM-ALARM OUT: 0

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 54 55

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products XT50 Instalační příručka Strana 31

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products XT50