Digital Monitoring Products XT50 Instalační příručka stáhnout pdf (Strana 44)

XT Series Programming Guide Digital Monitoring Products

ZONE INFORMATION

14.20 Receiver Routing

This option displays if Zone Type is set for Auxiliary 1 or Auxiliary 2.

Press any top row key to select the Receiver Routing for the selected zone.

Select NORM to send Alarm and Supv/Trbl messages from this zone to receiver 1 or

receiver 2 as programmed within the receiver.

Select 1 to send Alarm and Supv/Trbl messages from this zone to receiver 1 only,

regardless of the programming for that receiver.

Select 2 to send Alarm and Supv/Trbl messages from this zone to receiver 2 only,

regardless of the programming for that receiver.

Select BOTH to send Alarm and Supv/Trbl messages from this zone to both receivers,

regardless of the programming for either receiver.

14.21 Zone Number

Enter the zone number you want to program next. Return to the beginning of this

section and follow the descriptions of each programming option. If all zones are

programmed, press the ARROW key at the ZONE NO: – display to continue.

RECEIVER ROUTING

NORMAL

NORM 1 2 BOTH

ZONE NO: -

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 54 55

Žádné komentáře

Digital Monitoring Products XT50 Instalační příručka Strana 44