Digital Monitoring Products Canadian XR100 Manuál s instrukcemi stáhnout pdf (Strana 20)

Digital Monitoring Products XR100 Series Programming Guide

CommuniCation

3.27

SPV/TRBL YES

Supervisory/Trouble Reports

This option displays when the Path Type is Primary. All backup paths within the

groupfollowthesameprogrammingforSupervisory/TroubleReports.DefaultisYes.

NO YES FIRE

WhenYESisselected,thefollowingreportsaresentforallzonetypes:

•Trouble  •LowBattery  •Missing •Fault

•Restorals •SystemTroubles •SystemRestoral

WhenFIREisselected,thefollowingreportsaresentforFire,FireVerify,and

SupervisoryZones:

•Trouble  •LowBattery  •Missing •Fault

•Restorals •SystemTroubles •SystemRestoral

ServicemanreportsaresentregardlessoftheselectionmadeforSupervisory/

Trouble reports.

3.28

O/C USER NO YES

Opening/Closing and User Reports

This option displays when the Path Type is Primary. All backup paths within the

groupfollowthesameprogrammingforOpening/ClosingandUserReports.Default

is Yes.

 WhenYESisselected,thefollowingreportsbyuseraresenttothisreceiver.

 •Opening  •Codechanges(includingadding,deleting,changing)

•Closing  •Schedulechanges(temporary,permanent,shift)

•Bypass  •Holidaydatechanges

•Reset

3.29

DOOR ACS YES

Door Access Report

This option displays when the Path Type is Primary. All backup paths within the

group follow the same programming for Door Access Reports. Default is Deny.

NO YES DENY

SelectYEStoenableDoorAccessGrantedandDeniedreportstothisreceiver

wheneveradooraccessisgrantedtoauser.TheDoorAccessGrantedreportis

only sent if the keypad number has also been selected in Access Keypads under the

SYSTEM REPORTS programming.

SelectDENYtoenableDoorAccessDeniedreportsonlytothisreceiverwhenadoor

access is denied to a user.

3.30

SEND COMM TRBL:

Send Communication Trouble

NO YES

This option displays for each path and determines if and how communication

trouble on the path is sent to the receiver. A trouble message indicates both the

path number and communication type that failed. Default is Yes.

3.31

SEND PATH INFO:

Send Path Information

NO YES

ThisoptiondisplaysforeachpathandifYES,eachpanelmessageincludespath

information such as path number, communication type, and path type. Default is

No.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 77 78

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products Canadian XR100 Manuál s instrukcemi Strana 20

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products Canadian XR100