Digital Monitoring Products Canadian XR100 Manuál s instrukcemi Strana 25

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 78
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 24
XR100 Series Programming Guide Digital Monitoring Products
17
Device Setup
If you do not enter any area numbers, all users with Door Access authority receives a
dooraccesswithoutregardtoschedules.IftheusercodeisprogrammedforAnti-Pass
YES,thentheuserisloggedintoallmatchingareas.Thisuserisnotallowedtoaccess
theseareasagainuntiltheyhaveegressedthearea.SeeEgressAreas.
When all areas accessed by a door are armed, the door is locked by the panel.
Note: For an All/Perimeter, Home/Sleep/Away, or Home/Sleep/Away with Guest
system, Access Areas should be left at factory default settings.
6.8
1 2 3 4
5 6 7 8
EGRESS AREAS:
Egress Areas
PresstheCOMMANDkeytoprogramEgressAreas.Toselectanarea,enterthearea
number using the digit keys on the keypad. When an area is selected, an asterisk
appearsnexttotheareanumber.Enterthenumberagaintodeselectthearea.
Refer to the Multiple Displays section at the beginning of this document.
Note: For an All/Perimeter, Home/Sleep/Away, or Home/Sleep/Away with Guest
system, Egress Areas should be left at factory default settings.
Note: If an area is programmed as an access area, it cannot be programmed as an
egressareaandthereforedoesnotdisplayduringEgressAreasprogramming.
UsethisoptiontodetectAnti-passbackviolations.Anti-passbackrequiresauserto
properlyexit(egress)anareatheyhavepreviouslyaccessed.Ifusersfailtoexit
through the proper card reader location they are not granted access on their next
attempt.Usersmusthavematchingaccessareanumbersassignedtotheirprole,
toreceiveadooraccessatthisdevice.IftheuserisprogrammedforAnti-Pass
YES, then the user is logged out of all matching areas. This allows the user to again
access the area. See Access Areas section.
If you do not enter any area numbers, all users with Door Access authority receives
adooraccesswithoutregardtoschedules.IfyouarenotusingtheAnti-Pass
feature leave Egress Areas blank.
6.9
*1 *2 *3 *4
*5 *6 *7 *8
DISPLAY AREAS:
Display Areas
Press the COMMAND key to program Display Areas. To select an area between 1 and
8,entertheareanumberusingthekeypaddigitkeys.Whenanareaisselected,
anasteriskappearsnexttotheareanumber.Enterthenumberagaintodeselect
the area. Default is all area numbers. Refer to the Multiple Displays section at the
beginning of this document.
Display Areas allows the XR100 Series burglary activities to be segmented so that
onlyspecicarea(s)andtheirassociatedoperationappearataparticularkeypad.
Areanumber(s)selectedinthiseldaffectthewayusersinteractwiththesystem
from this particular device. For example: Program Device 1 to show only the zone
activities and armed status of Area 1.
Entertheareanumber(s)thatthiskeypadistodisplay.Thisallowsspecicarea
controlfromspecickeypads,aswellasannunciationofzonesassignedtothose
area(s).WhenDisplayAreasisleftdefaulted(allareasselected),MenuDisplay
andStatusListitemsdeterminewhetherzonealarmsandtroublesdisplayatthis
device, regardless of area assignment. Also, all system areas may be armed and
disarmed from this device.
Note: For an All/Perimeter or Home/Sleep/Away system, Display Areas should be
left at factory default settings.
ForHome/Sleep/AwaywithGuestarmingsystems,theDisplayAreasselection
determineswhichsystemthekeypadarmsanddisarms.Withareas1,2or3beingthe
rstareasselected,thekeypadisassignedtotheMainsystem.Witharea4,5or6
beingtherstareasselected,thekeypadisassignedtotheGuestsystem.
User Action Allowed
Whenanarea(s)isselected,thefollowinguseractionsareallowed:
•ArmingorDisarmingofthearea(s)selectedfromtheARMorDISARMmenu
•AlarmSilenceforthearea(s)selected
•ZoneBypassofzonesassignedtothearea(s)selected
•ZoneMonitorofzoneassignedtothearea(s)selected
•Shiftschedulechangesallowedforthearea(s)selected
•ClosingCheckScheduleExtendisallowedforthearea(s)selected
•DoorScheduleschangesareallowedfordevicesthathaveamatchingarea(s)as
denedinDeviceAccessAreas
Zobrazit stránku 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 77 78

Komentáře k této Příručce

Žádné komentáře