Digital Monitoring Products Canadian XR100 Manuál s instrukcemi stáhnout pdf (Strana 29)

XR100 Series Programming Guide Digital Monitoring Products

Device Setup

734 Site Code Programming

6.18.9 Site Code Position

Enterthesitecodestartpositioninthedatastring.PressanytoprowSelectkeyto

enteranumberbetween0-255.Defaultis1.

6.18.10 Site Code Length

Enterthenumberofcharactersthesitecodecontains.PressanytoprowSelectkey

toenteranumberbetween1-16.Defaultis8.

6.18.11 User Code Position

DenetheUserCodestartbitposition.PressanytoprowSelectkeytoentera

numberbetween0-255.Defaultis9.

6.18.12 User Code Length

DenethenumberofUserCodebits.PressanytoprowSelectkeytoentera

customnumber.Customnumberscanonlybeanumberbetween16-32.Ona

734N/

734N-WiFi

module,customnumberscanbebetween1-255.Thedefaultis16.

6.18.13 Require Site Code

PressthetoprowSelectkeyunderYEStouseasitecode.

InadditiontoUserCodeverication,dooraccessisonlygrantedwhenanyonesite

codeprogrammedattheSITECODEENTRYoptionmatchesthesitecodereceivedin

the Wiegand string.

6.18.13.1 Site Code Display

734 Module: Youcanprogramupto8three-digitsitecodes.Sitecoderangeis

0-999.Anypreviouslyprogrammedsitecodesdisplay.Dashesrepresentblank site

codes. Default is blank.

Note: A card with a site code greater than three digits cannot be used. Use only

cards with three-digit site codes.

734N/734N-WiFi Module:Youcanprogramupto8ve-digitsitecodes.Site code

rangeis1-65535.Anypreviouslyprogrammedsitecodesdisplay.SiteCode 1

defaultsto127.SiteCodes2-8defaulttoblank.Dashesrepresentblanksite

codes.

SiteCode1displaysrst.EnterasitecodenumberfollowedbytheCommandkey

toadvancetothenextoption,SiteCode2.Todeleteanexistingsitecode, press

anySelectkey.EitherenteranewsitecodefollowedbyCommand,or press

Command to leave blank and continue to the next site code. Repeat these steps

tochange,delete,oraddupto8sitecodes

6.18.14 Number of User Code Digits

The734modulerecognizesusercodesfromfourtotendigitsinlength.The

734N/

734N-WiFi

modulerecognizesusercodesfrom1-10digitsinlength.Press

anytoprowSelectkeytoenterausercodedigitlengthbetween4-10digits.This

number must match the user code number length being used by the panel. Default

is5.ForanXR100AreaSystem,use4to10digits(typically5).

Anyselectionabove5digitsrequireentryofthecustomcarddenitionswith

custom site and user code positions for the Wiegand string. When searching the bit

stringfortheusercode,thedigitsareidentiedandreadfromlefttoright.

SITE CODE

POSITION: 1

SITE CODE

LENGTH: 8

USER CODE

POSITION: 9

USER CODE

LENGTH: 16

REQUIRE SITE

CODE? NO YES

SITE CODE 1:

(1-65,535) 127

NO OF USER CODE

DIGITS: 5

SITE CODE 1: -

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 77 78

Komentáře k této Příručce

Žádné komentáře

Digital Monitoring Products Canadian XR100 Manuál s instrukcemi Strana 29

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Monitoring Products Canadian XR100